The full color graphical display lets you see and analyze each signal clearly. Its high speed sample rate, at 256 samples per cycle, provides excellent fidelity in reproducing waveforms and capturing transients that happen as fast as 62.5s.
PowerPads 4MB of memory is conveniently partitioned to let you store four different types of data, synchronized or independent of each other. You can store up to 12 screen snapshots, up to 50 captured transients that contain four cycles for each active input, and 4096 alarm events.You can also record trend data for days, weeks or even months. Six direct access function buttons quickly let you see.
Display Volts, Amps, THD and Crest Factor by phase or for all phases. You can display all the voltage inputs on one screen, phase-to-phase or phase-to-neutral. Real-time phasor diagrams can be displayed for volts and amps, also by phase or for all phases. Display Harmonics out to the 50th for Volts, Amps and VA. Individual Harmonics are displayed as a percentage and in real value.
Harmonic direction and sequencing can also be displayed. Set, capture and display transients. You select the threshold and the number of transients to capture. PowerPad then captures four waveforms for each transient; the triggering waveform as well as one pre- and two post-triggered waveforms.
As many as 1200 waveforms can be captured. Configure, capture and display up to 4096 alarm events based on up to ten different trigger variables. Each captured alarm event will show the phase, the variable and the value as well as the time and duration. Set up and record trend data at selectable rates from one sample/second to one sample every 15 minutes on as many as 22 different variables for all phases.
See the recorded data on screen, zoom in and out and scroll the time axis to analyze the data. Display Watts, VARs and VA by phase and total. Accumulate totals and see whether the energy is inductive or capacitive.If youre not convinced yet, consider these other functions and features. PowerPad uses current probes that auto configure the instruments current channel for range and scale. PowerPad comes with an online help system that gives you clear information about the functions and buttons for each screen. PowerPad speaks six different languages.
At the press of a button, information can be displayed in English, Spanish, French, Portuguese, Italian and German. True RMS single-, two- and three-phase measurements at 256 samples/cycle, plus DC.
Automatic current probe recognition and scaling. True RMS voltage and current measurement. Measures DC volts, amps and power.
Display and capture voltage, current and power harmonics to 50th order, including direction, in real time. Capture transients down to 1/256th of a cycle. Nominal frequency from 40 to 70Hz.
VA, VAR and W per phase and total. KVAh, VARh and kWh per phase and total. Neutral current display for three-phase.
Crest factors for current and voltage. Power Factor, displacement PF display. Captures up to 50 transients.Phase unbalance (current and voltage). Harmonic Distortion (total and individual) from 1st to 50th. Records date and characteristics of disturbances. Immediate printout directly to a printer. Screen snapshot function captures waveforms or other information on the display. Optically isolated RS-23 communication port. Verification of power distribution circuits. Measurement and recording of power system quality (kW, VA, VAR). Energy metering (kVAh, VARh, kWh). In plant troubleshooting of power distribution panels and individual machinery. Determine harmonic problems originating from source or load. 4MB partitioned for waveforms, transients, alarms and trend recording. MN Clamp: 0 to 6A/120A or 0 to 240A SR Clamp: 0 to 1200A MR Clamp: 0 to 1000AAC, 10 to 1400ADC AmpFlex®: 0 to 6500A1. Current Probes (Arms) MN Clamp SR Clamp AmpFlex® Probe. 0 to 240A 0 to 1200A 10 to 6500A.
0.1A 0.1A; 1A 1000A 0.1A; 1A 1000A. ±(0.5% + 2cts) ±(0.5% + 2cts) ±(0.5% + 1A). Power Factor (PF & DPF). 1.000 to 1.000.
±(1.5% + 0.01). Phase Angle (VA, AA, VV). Harmonics (1st to 50th) F = 40 to 69Hz (V 50V, A > Inom/100). Total Harmonic Distortion (V & A).0.00 to 9.99. 9.6V NiMH rechargeable battery pack AC supply: 110/230VAC ±20% (50/60Hz). 8 hrs with display on; 35 hrs with display off (record mode). 9.5 x 7 x 2 (240 x 180 x 55mm). 4.6 lbs (2.1kg).
1/4 VGA (320 x 240) color LCD. 32° to 122°F (0° to 50°C). 4° to 122°F (-20° to +50°C). IV When used with SR193 or AmpFlex Probes. 600V Cat III With MN193 or MR193 Probes Pollution Degree 2.Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our. Please don't hesitate to. For a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment.
Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers.
If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. (Certain orders may take longer for processing due to comprehensive final service inspections). The item "AEMC 3945-B PowerPad Three-Phase Power Quality Analyzer Meter True RMS 3945" is in sale since Thursday, November 7, 2019. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Multimeters".
The seller is "test_equipment_company_store" and is located in Toledo, Ohio. This item can be shipped worldwide.