Hand Held Power

Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2

Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2
Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2

Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2    Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2

The Following Items Are Included. Fluke 434 Series II HandHeld Three Phase Power Quality Analyzer (BC# 32778-L/T) w/ Options. (4) Fluke i430 Flex Cables. This Item Has A Current Calibration! Fluke 434 Series II HandHeld Three Phase Power Quality Analyzer Energy Meter Installed Options: - V/A/Hz - Dips & Swells - Harmonics - Power & Energy - Energy Loss Calculator - Power Inverter Efficiency - Unbalance - Inrush - Monitor Helps locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems Includes (4) i430 Flex Cables, Carrying Case & Accessories As Listed Above!

Fluke 434 Series II Energy Analyzer. The Fluke 434 Series II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality.

This energy monetization capability identifies the most energy-wasteful areas of your facility, enabling you to identify energy saving solutions. Add basic power quality measurements to the package and youve got yourself one powerful troubleshooting tool.

The new 430 Series II Three-Phase Power Quality and Energy Analyzers offer the best in power quality analysis and introduce, for the first time ever, the ability to monetarily quantify energy losses. The new Fluke 434, 435 and 437 Series II models help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems.

Additionally, these models feature revolutionary power quality and energy measurement functions that help facilities reduce electrical power consumption, and improve the performance and lifespan of electro-mechanical equipment. Below you will find brief descriptions of these new features. Previously, only experts could calculate how much energy was wasted due to power quality issues; utilities could calculate the cost, but the required measurement process was beyond the reach of average electricians. With the new, patented Unified Power function of the 430 Series II, you can use one handheld tool to determine how much power is being wasted, and calculate exactly what the extra consumption costs.

Flukes patented Unified Power Measurement System provides the most comprehensive view of power available, measuring. These UPM calculations are used to quantify the fiscal cost of energy loss caused by power quality issues.

Power inverters take DC current and transform it into AC current, or vice versa. Solar generation systems usually include an inverter that takes the DC energy from the solar cells and converts it to useful AC power. Inverters can lose performance over time and need to be checked. By comparing the input power with the output power you can determine the system efficiency. The Fluke 430 Series II analyzers provide three ways to analyze measurements.

Cursors and zoom tools can be used live while taking measurements, or off line on stored measurement data. Additionally, the stored measurements can be transferred to a PC with the included software to perform custom analysis and create reports.

Measurement data can also be exported to common spreadsheet programs. Store hundreds of measurement datasets and screen captures for use in reports (depending on memory capacity). Pre-programmed setups and user-friendly screens make power quality testing as simple as you would expect from Fluke.

The high-resolution color screen updates every 200 ms and displays waveforms and wiring diagrams color coded to industry standards. Handy on-screen wiring diagrams for all commonly used three-phase and single-phase configurations guide you through connections.

Measure true-rms, peak voltage and current, frequency, dips and swells, transients, interruptions, power and power consumption, peak demand, harmonics up to the 50th, inter-harmonics, flicker, mains signaling, inrush and unbalance. Designed to help protect you and your equipment, the Fluke 430 Series II analyzers and accessories are all certified to meet the stringent standards for use in CAT IV 600 V and CAT III 1000 V environments such as power connections and outlets throughout a low-voltage power distribution system.

Logger: record the detail you need. User-configurable, long-term recording of MIN, MAX and AVG readings for up to 150 parameters on all 4 phases.

Enough memory is available to record 600 parameters for over a year with 10 second resolution, or capture smaller variations with resolution down to 0.25 seconds. The logger function is quickly accessed by the LOGGER button, the simple step-by-step setup makes capturing your important measurements as easy as can be. Every time an event or voltage distortion is detected, the instrument triggers and automatically stores voltage and current waveforms on all three phases and neutral.

The analyzer will also trigger when a certain current level is exceeded. Hundreds of dips, swells, interruptions and transients can be captured this way. You can see voltage transients as high as 6 kV and as fast as 5 microseconds.

System-monitor: summary screen of overall power quality health. The MONITOR mode delivers a dashboard display of rms voltage, harmonics, flicker, interruptions, rapid voltage changes, swells, unbalance, frequency and mains signaling. The dashboard is updated live, showing compliance of each parameter to EN50160 limits or your own limits.

Color-coded bars clearly show which parameters are inside (pass) or outside (fail) limits. During a monitor session, you can easily drill down to more detail of any parameter to view and capture its trend for a report. Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses. Analyze the trends using the cursors and zoom tools. 600V CAT IV/1000 V CAT III Rated for use at the service entrance.

Measure all three phases and neutral. With four flexible current probes with enhanced thin flex design to fit into the tightest places. Every measurement is always automatically recorded, without any set-up. Ten power quality parameters on one screen according to EN50160 power quality standard.

Configure for any test condition with memory for up to 600 parameters at user defined intervals. Seven hours operating time per charge on Li-ion battery pack. Calculate the fiscal cost of energy waste due to poor power quality.

Quantify the before and after installation improvements in energy consumption to justify energy saving devices. Quickly diagnose problems on-screen to get your operationg back online. Detect and prevent power quality issures before the cause downtime. Uncover hard-to-find or intermittent issues. Verify electrical system capacity before adding loads.

1 V to 1000 V phase to neutral. ± 0.5% of nominal voltage. 1 Vpk to 1400 Vpk. 1.0 > 2.8. ± 1% of nominal voltage. Amps (accuracy excluding clamp accuracy). 5 A to 6000 A. ± 0.5% ± 5 counts.

0.5 A to 600 A. 5 A to 2000 A. 0.5 A A to 200 A (ac only). ± 1% ± 10 counts. 42.50 Hz to 57.50 Hz.

51.00 Hz to 69.00 Hz. 0.1 W to 1 MW. Depends on clamp scaling and V nominal.

± 1% ± 10 counts Excluding line resistance accuracy. DC, 1 to 50 Grouping: Harmonic groups according to IEC 61000-4-7. OFF, 1 to 50 Grouping: Harmonic and Interharmonic subgroups according to IEC 61000-4-7.

0.0 % to 100 %. ± 0.1% ± n x 0.1 %. ± 0.1% ± n x 0.4 %. 0.0 to 1000 V.

± 0.1% ± n x 0.1%. 0.0 to 600 A. ± 5% ± 5 counts. ± 5% ± n x 2 % ± 10 counts.

0.00 to 20.00. 0.0 % to 20.0 %. Threshold, limits and signaling duration is programable for two signaling frequencies. 60 Hz to 3000 Hz. 0 % to 100 %.

Absolute V3s 3 second avg. 0.0 V to 1000 V. ± 5 % of nominal voltage.

Design Rugged, shock proof with integrated protective holster Drip and dust proof IP51 according to IEC60529 when used in tilt stand position Shock and vibration Shock 30 g, vibration: 3 g sinusoid, random 0.03 g 2 /Hz according to MIL-PRF-28800F Class 2. Brightness: 200 cd/m 2 typ.

Using power adapter, 90 cd/m 2 typical using battery power Size: 127 mm x 88 mm (153 mm/6.0 in diagonal) LCD Resolution: 320 x 240 pixels Contrast and brightness: user-adjustable, temperature compensated. 8GB SD card (SDHC compliant, FAT32 formatted) standard, upto 32GB optionally Screen save and multiple data memories for storing data including recordings (dependent on memory size). Time and date stamp for Trend mode, Transient display, System Monitor and event capture. 0 °C +40 °C; +40 °C +50 °C excl. +10 °C +30 °C: 95% RH non-condensing +30 °C +40 °C: 75% RH non-condensing +40 °C +50 °C: 45% RH non-condensing.

Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V Maximum storage altitude 12 km (40,000 ft). EN 61326 (2005-12) for emission and immunity. Mini-USB-B, Isolated USB port for PC connectivity SD card slot accessible behind instrument battery.

Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our.

Please don't hesitate to. For a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment.

Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. (Certain orders may take longer for processing due to comprehensive final service inspections). The item "Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2" is in sale since Thursday, November 12, 2020.

This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Multimeters". The seller is "test_equipment_company_store" and is located in Toledo, Ohio.

This item can be shipped worldwide.

  • Brand: Fluke Networks
  • MPN: 434 Series II
  • Display: Digital
  • Features: Data Logging
  • Form Factor: Handheld
  • Test/Measurement Functions: Energy
  • Model: 434 Series II


Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2    Fluke 434 Series II Three Phase Power Quality Analyzer Energy Meter 434-II 2