Hand Held Power

Fluke 43 HandHeld Power Quality Analyzer Meter

Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter
Fluke 43 HandHeld Power Quality Analyzer Meter

Fluke 43 HandHeld Power Quality Analyzer Meter    Fluke 43 HandHeld Power Quality Analyzer Meter

The Following Items Are Included. Fluke 43 HandHeld Power Quality Analyzer (BC# 31778-L/T). (2) 1000V Hard Point Test Leads. This Item Has A Current Calibration!

Fluke 43 HandHeld Power Quality Analyzer. Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current.

Includes Carrying Case & Accessories As Listed Above! The Fluke 43 is a single phase power quality analyzer which combines the most useful capabilities of a power quality analyzer, multimeter and scope. It measures power harmonics, captures voltage sags, transients and inrush current. The Fluke 43's monitoring functions help track intermittent problems and power system performance.

The Fluke 43 Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. NiMH Battery provides extended operating time of 6.5 hours. Combines the most useful capabilities of a power quality analyzer, multimeter and scope. Simulates 3-phase power (assuming balanced loads) from a single-phase measurement. Monitoring functions help track intermittent problems and power system performance.

Menus use familiar electrical terminology. Toggle through the most commonly used power quality modes with a single keystroke. Records two selectable parameters for up to 16 days. 20 measurement memories to save/recall screens and data with cursor readings. FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic. Measures resistance, diode voltage drop, continuity, and capacitance.

Users / applications manual and power quality video to help answer tough questions. Software and optically isolated interface cable. True-rms voltage (ac+dc) Ranges: 5.000V, 50.00V, 500.0V, 1250V.

Accuracy: ±(1% +10 counts) True-rms current (ac + dc) Ranges: 50.00A, 500.0A, 5.000 kA, 50.00 kA Accuracy: ±(1% +10 counts) Mains frequency Ranges: 40.0 to 70.0 Hz Accuracy: ±(0.5% +2 counts). Watts, VA, VAR Ranges: 250 W, 2.50 kW, 25.0 kW, 250 kW, 2.50 MW, 250 MW Accuracy: ±(4% + 4 counts) Power Factor, PF Displacement Power Factor, DPF Range: 0.00 to 0.25 Accuracy: Not specified Range: 0.25 to 1.0 Accuracy: ±0.04. Voltage Ranges: 1st to 51st harmonic Accuracy: ±(3% +2 counts) to ±(15% +5 counts) Current Ranges: 1st to 51st harmonic Accuracy: ±(3% +8 counts) to ±(5% +8 counts) Power Ranges: 1st to 51st harmonic Accuracy: ±(5% +2 counts) to ±(30% +5 counts) Line frequency Ranges: 40 Hz to 70 Hz fundamental Accuracy: ±0.25 Hz Phase Ranges: 2nd to 51st harmonic Accuracy: ±3 º to ±15 º K-factor Ranges: 1.0 to 30.0 Accuracy: ±10%. Recording times: 4 min to 16 days (selectable) True-rms voltage: Ranges: 5.000V, 50.00V, 500.0V, 1250V. Accuracy: ±(2% +10 counts) True-rms current Ranges: 50.00A, 500.0A, 5.000 kA, 50.00 kA Accuracy: ±(2% +10 counts). Recording times: 4 min to 16 days (selectable) Parameters: Choose up to two from one of the groups below V/A/Hz: Line voltage, current, frequency Power: Watts, VA, VAR, PF, DPF, frequency Harmonics: THD, harmonic voltage, (or current, or power), frequency, % of total, phase Ohms: Ohms, diode, continuity, capacitance Temperature: Temperature Scope: DC voltage, dc current, ac voltage, ac current, frequency, pulse width, phase, duty cycle, peak max, peak min, peak min-max, crest factor. Minimum pulse width: 40 ns Voltage threshold settings: 20%, 50%, 100%, 200% above or below normal voltage Min voltage and max voltage at cursor: Ranges: 10V, 25V, 50V, 125V, 250V, 500V, 1250V Accuracy: ±5% of full scale. Current ranges: Ranges: 1A, 5A, 10A, 50A, 100A, 500A, 1000A Inrush times: Ranges: 1s, 5s, 10s, 50s, 100s, 5 min Cursor readings, Current at cursor Ranges: 12.5A, 25A, 50A, 125A, 250A, 500A, 1250A, 2500A, 5 kA Accuracy: ±5% of full scale Time between cursors Ranges: 4 to 235 pixels (1 pixel = inrush time/250) Accuracy: ±(0.2% + 2 pixels).

Time ranges: Ranges: 20 ns/div to 60 s/div Max sampling rate: Ranges: 25 MS/s Bandwidth: Voltage channel [1]: 20 MHz at inputs, 1 MHz with TL24 Leads Current channel [2]: 15 kHz at inputs, 10 kHz with 80i-500s Probe Coupling: AC, DC Vertical sensitivity: Ranges: 5 mV/div to 500V/div Vertical resolution: 8 bit (256 levels) Record length: 512 samples per channel Timebase modes: Normal, roll, single Pre-trigger: Up to 10 divisions Measurements: dc, ac, ac+dc, peak, peak-peak, frequency, duty cycle, phase, pulse width, crest factor. Ohms: Ranges: 500.0 W , 5.000 k W , 50.00 k W , 500.0 k W , 5.000 M W , 30.00 M W Accuracy: ±(0.6% +5 counts) Diode voltage: Accuracy: ±(2% +5 counts) Continuity: Beeper on at. Ranges: -100.0 ºC to 400.0 ºC, -200.0 ºF to 800.0 ºF Accuracy: ±(0.5% +5 counts). To printer: Supports HP Laserjet. Epson FX/LQ and Postscript printers with optional PAC91 Printer Adapter Cable To PC: FlukeView.

Power Quality Analyzer Software included. Hardware requirements: PC or 100% compatible with Windows. Enough RAM for Windows operating system. 4 MB hard drive space.

Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our. Please don't hesitate to. For a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.

Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. (Certain orders may take longer for processing due to comprehensive final service inspections). The item "Fluke 43 HandHeld Power Quality Analyzer Meter" is in sale since Tuesday, April 9, 2019. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Testers & Calibrators\Cable Testers & Trackers".

The seller is "test_equipment_company_store" and is located in Toledo, Ohio. This item can be shipped worldwide.

  • Brand: Fluke
  • Model: 43
  • MPN: 43


Fluke 43 HandHeld Power Quality Analyzer Meter    Fluke 43 HandHeld Power Quality Analyzer Meter