Fluke 41 HandHeld Power Harmonics Analyzer 41. The Following Items Are Included. Fluke 41 Power Harmonics Analyzer. 1000V Hard Point Test Leads (Red, Black). 25 Pin To 9 Pin Adapter.25 Pin To 25 Pin Adapter. Fluke 80i-500s AC Current Probe w/ Instructions. 1-Flukeview 41 software DOS version 1.0. 2-Flukeview 41 software P/N 936880. Fluke 41 HandHeld Power Harmonics Analyzer. You can use the Tester to measure voltage events (undervoltage, overvoltage, line outages, and neutral to ground levels), current levels, or to measure power levels. Includes Fluke 80i-500s AC Current Probe, Hard Carrying Case & Accessories As Listed Above! Plus floppy 3.5 disk driver for use to read the two floppies disk 1-Flukeview 41 software DOS version 1.0.
You can use the Tester to measure voltage and current inputs at power line and harmonic frequencies. Using these inputs, the Tester automatically calculates power and a wide range of other measurements useful in determining harmonic distortion levels and sources.These capabilities allow you to monitor power quality before and after an installation, troubleshoot a power distribution system, and print out or download data for additional analysis. The Tester is both a harmonics measurement tool and a power meter or digital multimeter. Fundamental frequency measurements (to 100 Hz) and harmonic frequency measurements (to about 2 kHz) are also possible.
The Tester cannot measure frequencies above about 2 kHz. Measure current, load balance, total harmonic distortion. Measure for excessive current (tripping of circuit breakers) and other general measurement uses such as level of current flow in each circuit. Measure balance between phases, neutral current and frequency, harmonic distortion. Measure for excessive current, proper frequency, and other general uses.
Measure input and output frequency and input and output current. The Tester measures the output current frequency of the drive. Input power and harmonic currents can also be measured. The item "Fluke 41 HandHeld Power Harmonics Analyzer 41 With Case, Probes, Clamp, Manual-Used" is in sale since Friday, February 5, 2021. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Power Quality Analyzers".
The seller is "amsaw88" and is located in Carmichael, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.