Lonsdor KH100+ Hand-Held Smart Remote Car Programmer tool Detect IMMO Frequency

  

International Buyers - Please Note. LONSDOR KH100+ Remote Key Programmer.

KH100+ Handheld device is the latest upgraded version from old KH100, it embraces all the functions that KH100 had, besides, it is far superior in below ways. 4-pack remotes & smart key involved.

Optimized power system(faster charge &heat protection). Modern appearance design, in line with the operating habits of the public. Device system comes with operation instructions, easier for you to use.

It covers almost all the functions of the similar products in the market. Built-in super sensor to collect data(over-range data collection). Exclusive support for 8A(H chip) generation. Built-in WIFI module, can connect to network at any time 7. 4-pack remotes & smart key involved 8. Handy chip holder integrated, 902MHZ supported 9. For Toyota 8A Smart Key Direct copy to Add key(Latest Update). When complete the registration activation, it enters below menu interface. Enter this menu, follow system prompts to operate (as shown).

Enter this menu, you can identify and copy IC card, and generate garage key as well. Follow the prompts to operate(as shown below).

Put KH100+'s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate. This device supports below chip types:? Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.

Some chip data will be covered and locked. Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions. Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions. Search smart induction area Connect remote key with remote connector, Put KH100+'s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below). Detect IMMO Connect remote key with remote connector, Put KH100+'s antenna close to key identification coil, and use key to turn ignition ON. When KH100+ buzzer beeps, it means signal is detected. Enter this menu, put remote control at the device's induction area to detect remote frequency. Include: detect infrared signal, unlock For Toyota smart key, FT for Toyota smart key, Charge key, More functions, to be continued..

Put remote control at the infrared signal detection area, press the remote's button once. When the light on KH100+'s screen is on, it indicates there is infrared signal, otherwise there is no signal(see below pic). For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Unlock For Toyota smart key/detect for Toyota key status. For a chargeable key with battery, you can perform this function.

How to register Lonsdor KH100. Note: After booting the device, please connect to WIFI and enter the following process. 2 Boot the device and enter registration activation process. 3 Input user name, password.

Then input the code to submit registration. 4 Account registered successfully, it will take 5 seconds to bind the device. 5 Successful registration, enter the system. For Registered user(who has registered Lonsdor products before).

Then input the code to submit login. 4 Account login succeeded, it will take 5 seconds to bind the device.

In addition, users who have already registered Lonsdor's product can directly choose [registered user] to activate account. How to update Lonsdor HK100. Connect the device to network. Then choose [check for updates].

Screen size: 2.8 inch. Connector port: PS/2 +1.25mm spacing, 6PIN terminal. 1pc x LONSDOR KH100+ Latest handheld device. It is quick and safe.

Normally we would mark the parcel in low value to avoid the duty, but different country, the policy is different, hence to find out which if any of these may apply, please contact your local government. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard. After finish quality check, our QC stuff will carefully do quality check and paste our own QC label in the form of month/date/year on every product. The product have quality problem. If you have any questions, please.

We will try our best to provide the best service and reliable products for every customer. We would be very glad to help you. We would try our best to reply to your emails as soon as possible.

Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. We will responde you within 24 hours. Working time: GMT8 (8:30-18:00) from Monday to Friday.

Out of duty on Saturday afternoon and Sunday! This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Other Diagnostic Service Tools". The seller is "icarecar" and is located in this country: CN. This item can be shipped worldwide.

• Advantage 1: 4-pack remotes & smart key involved
• Advantage 10: Upgraded packaging
• Advantage 2: Handy chip holder integrated
• Advantage 3: 902MHZ supported
• Advantage 4: Longer distance data collection
• Advantage 5: More accuracy frequency detection
• Advantage 6: More user friendly
• Advantage 7: Faster running
• Advantage 8: Larger memory
• Advantage 9: Optimized power system(faster charge &heat protection)
• Antenna: To induce simulated chip and detect ignition coil
• Applicable Regions: no limit
• Brand: Lonsdor
• Bundle Description: Lonsdor KH100+ Hand-Held Remote Key Programmer
• Country/Region of Manufacture: China
• Custom Bundle: No
• Feature: Remote Frequency,Access Control Key,Chip Generation
• Features 2: Exclusive support for 8A(H chip) generation,Built-in WIFI module
• Features1: Built-in super sensor to collect data(over-range data collection)
• Function: Identify Copy,Chip Simulation,Remote Generation
• Function 1: access control key,simulate/generate chip, generate remote (key)
• Function 2: detect remote frequency,detect IMMO,unlock for Toyota smart key
• Function List 3Chip Generation: Chip Generation,Coil Identification,Special Function
• High-frequency detection: To identify and copy IC card
• Induction coil: To identify, copy, generate key chip or remote, etc.
• Manufacturer Part Number: KH100+, Update of KH100
• Modified Item: No
• New features 1: 4-pack remotes & smart key involved
• New features 2: Handy chip holder integrated
• New features 3: 902MHZ supported
• New features 4: Longer distance data collection
• New features 5: More accuracy frequency detection
• New features 6: More user friendly，Faster running，Larger memory
• Non-Domestic Product: No
• OBD Interface: CAN, EOBD, OBD, OBDII
• Type: Key Programmer
• Vehicle Type: Passenger Vehicle
• Warranty: 1 Year
• UPC: 889327039128